ETX-2i: IP and Carrier Ethernet Demarcation Device
Available as a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services and IP VPNs functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for mobile backhauling.
Up to eight GbE combo ports
Integrated wire-speed switch/router
Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
NEBS-compliant and environmentally hardened enclosure options
3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
The ETX-2i ethernet platform is a line of next-generation NID/NTUs and Carrier Ethernet demarcation device options that enables advanced networking demarcation for SLA-based, L2 and L3 business services, wholesale services and mobile backhaul. The ETX-2i offers a variety of Ethernet network products supporting these connection rates: 1-GbE, 10-GbE (10GB Ethernet), 100-GbE (100GB Ethernet), and 400-GbE*.
MEF 3.0 Certified: ETX 2i delivers E-Line (EVL, EVPL), E-LAN (EPLAN, EVPLAN), E-Tree (EP-TREE, EVP-TREE), and E-Access services compliant with MEF 3.0 and CE 2.0 certifications.
*Roadmap
To zoom in/out, scroll your mouse wheel
Network Demarcation and Aggregation
The ETX-2i provides MEF 3.0 demarcation and aggregation over any access, including over LTE/broadband. Its FPGA architecture flexibly adapts to future customer needs.
ETX-2i: IP and Carrier Ethernet Demarcation Device
Available as a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services and IP VPNs functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for mobile backhauling.
Up to eight GbE combo ports
Integrated wire-speed switch/router
Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
NEBS-compliant and environmentally hardened enclosure options
3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
of Carrier Ethernet demarcation and aggregation capabilities, up to 100 GbE rates
Powerful
Carrier-class operating system uses interoperable NETCONF protocol
Wire-speed
Networking performance while preserving CPU resources for instantiation of additional VNFs
Consistent
CE 2.0 and IP service delivery over any access infrastructure
ETX-2i-B: IP and Carrier Ethernet Demarcation Device
Available as a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services and IP VPNs functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for mobile backhauling.
Up to eight GbE combo ports
Integrated wire-speed switch/router
Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
NEBS-compliant and environmentally hardened enclosure options
3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
The ETX-2i-10G combines intelligent, high bandwidth demarcation and aggregation capabilities for enterprise headquarters and mobile backhaul operators. As an aggregation solution at the concentration point, a single unit can support numerous services and concurrent OAM sessions.
19” unit with up to four 10-GbE and up to 24 GbE ports in various combinations
Half-19” unit with up to four 10-GbE and up to eight GbE ports in various combinations
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
ITU-T G.8032 Ethernet Ring Protection Switching
NEBS-compliant and environmentally hardened enclosure options
ETX-2i-100G delivers the full suite of Carrier Ethernet demarcation and aggregation capabilities, at 100 GbE rates. ETX-2i-100G addresses the increasing demand for high bandwidth access to data centers, while maintaining MEF CE 2.0 SLAs, service monitoring, flexibility and management.
19”, 1RU with redundant power supply
Two 100G platforms:
- Three 100-GbE (QSFP28) and 10 x 1/10-GbE SFP+ interfaces
- Four 100-GbE (QSFP28) and 16 x 1/10-GbE SFP+ interfaces
Advanced QoS with hierarchical policing and bandwidth shaping per EVC and EVC.CoS
Accurate and scalable hardware based OAM and performance monitoring per ITU-T Y.1731 and TWAMP
The ETX-2i-10G combines intelligent, high bandwidth demarcation and aggregation capabilities for enterprise headquarters and mobile backhaul operators. As an aggregation solution at the concentration point, a single unit can support numerous services and concurrent OAM sessions.
19” unit with up to four 10-GbE and up to 24 GbE ports in various combinations
Half-19” unit with up to four 10-GbE and up to eight GbE ports in various combinations
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
ITU-T G.8032 Ethernet Ring Protection Switching
NEBS-compliant and environmentally hardened enclosure options
ETX-2i: IP and Carrier Ethernet Demarcation Device
Available as a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services and IP VPNs functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for mobile backhauling.
Up to eight GbE combo ports
Integrated wire-speed switch/router
Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
NEBS-compliant and environmentally hardened enclosure options
3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
A comprehensive look at today’s vCPE deployment drivers and challenges brought on by the move towards disaggregated architecture. An in-depth review of the most compelling use cases with specific focus on CSP needs.
Success!
Resource file download completed. Notice: as a registered visitor, you gain access to all the data in our website.
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcase
Got a specific question in mind? Need a quote? One of our experts will be happy to provide you with further information. Please fill out this short form and we'll make sure someone contacts you.
Download the file
Download the file
To download this file, please fill in the details below. Already registered? Sign in.
