Your Network's Edge®
You are here
ETX-2
When looking for next-generation IP and Carrier Ethernet Networking Interface Device (NID), also known as Network Termination Unit (NTU), the RAD ETX-2 line of next-generation offers advanced demarcation for SLA-based business services, wholesale services and mobile backhaul. A Network Termination Unit (NTU) serves as the crucial endpoint that connects customer premises to the carrier's network, providing the necessary interface for Ethernet services. NTUs are responsible for managing traffic, ensuring quality of service (QoS), and monitoring network performance to meet stringent SLA requirements.
The ETX-2 is MEF Carrier Ethernet 3.0-certified for E-Line, E-LAN, E-Tree, and E-Access services, as well as delivering TDM pseudowire over packet networks. Supporting high capacity service provisioning per EVC/EVC.CoS, flexible classification and H-QoS traffic management, ETX-2 offers accurate and scalable service testing as an RFC2544 test device as well as performance monitoring. The ETX-2 is supported by RADview management and enables a variety of protection mechanisms. It also offers NEBS-compliant and environmentally hardened enclosure options.
Key Take-Aways
and aggregation for SLA-based Carrier Ethernet and TDM over packet
synchronization for LTE/LTE-A backhaul
service delivery over any access infrastructure
ETX-203AX: Carrier Ethernet Demarcation Device
ETX-203AX is ideal for carriers, service providers, and wholesale operators requiring advanced Ethernet functionality at customer premises and multi-tenant units (MTUs).
- Four and six FE/GbE ports; flexible selection of SFP and copper interfaces
- Outdoor enclosure option
- Wide range AC/DC power supply
ETX-203AM: Universal Carrier Ethernet Demarcation Device
Available as a modular demarcation device, the ETX-203AM enables operators to deliver Carrier Ethernet services and L2 VPNs over any network connection.
- Four FE/GbE user ports
- Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL, or SHDSL
ETX-203AX-T: Carrier Ethernet Device with LTE/Broadband Connectivity
ETX-203AX-T extends Ethernet VPN services to new, out-of-reach locations, allowing rapid site commissioning by using readily available LTE or broadband networks. The ETX-203AX-T enables cost-effective Ethernet VPN services backup using LTE or broadband. Additional cost optimization can be achieved by splitting traffic between a service-assured VPN and best-effort LTE or broadband access.
- Five FE/GbE ports with flexible selection of SFP and copper interfaces
- Optional built-in LTE modem with global service coverage
- Secure EVC tunneling over private IP/LTE networks or over the internet using L2oGRE or L2TPv3 protocols
- Full suite of MEF CE-2.0 capabilities for SLA monitoring, diagnostics and fault detection
- Fragmentation and IPsec support
- Data and management protection using LTE or broadband
- Integrated wide-range AC/DC power supply
ETX-205A: Carrier Ethernet/Mobile Demarcation Device
The ETX-205A provides advanced Carrier Ethernet demarcation and offers combo interfaces and power supply redundancy. For LTE/LTE-A mobile backhaul, the ETX-205A is installed at cellular tower and controller sites to guarantee differentiated SLAs.
- L2 VPN service demarcation with superior traffic management and monitoring capabilities
- Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
- Distributed GMTM architecture integrating built-in GPS receiver with IEEE 1588v2 Grandmaster functionality for cost-optimized LTE deployments
- E1/T1 pseudowire services per MEF-8, UDP/IP, MPLS static labeling in SAToP and CESoP modes, and with CAS
ETX-220A: 10G Carrier Ethernet Demarcation/Aggregation Device
The ETX-220A combines intelligent demarcation and aggregation capabilities to deliver SLA-based Carrier Ethernet services for enterprise and carrier-to-carrier E-Access applications.
- Up to four 10-GbE ports and up to 20 x 1-GbE ports in various combinations
- Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
ETX-203AX-T
Carrier Ethernet Device with LTE/Broadband Connectivity
- Five FE/GbE ports with flexible selection of SFP and copper interfaces
- Optional built-in LTE modem with global service coverage
- Secure EVC tunneling over private IP/LTE networks or over the internet
- Full suite of MEF CE-3.0 capabilities for SLA monitoring, diagnostics and fault detection
- Data and management protection using LTE or broadband
- Integrated wide-range AC/DC power supply
Tips from experts
Resources
Links & Tools
ETX-2 Devices Data Sheet
ETX-2 Devices (ETX-203AM, ETX-203AX, ETX-205A, ETX-220A)
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTEETX-203AX-T Data Sheet
ETX-203AX-T
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTE
Presentations
RADinsight PM Presentation
RADinsight PM Presentation
Unlock Customer Insights from Network Traffic Data- How this cloud-based, AI-powered solution provides relatable, actionable insights for CSPs
- See fault isolation and future cyber-attack prevention on a per service, per customer basis.
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTEThe Secret to Fast Carrier Ethernet Service Roll Outs in Underserved Areas
The Secret to Fast Carrier Ethernet Service Roll Outs in Underserved Areas
How CSPs can eliminate the 30-60 day customer setup period, even where fiber is unavailable.-
Carrier Ethernet Market Snapshot
-
OTT Carrier Ethernet
-
Use Cases
-
Security and Automation
-
Takeaways
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTE-
Carrier Ethernet H.QoS
Carrier Ethernet H.QoS
Support Multiflow, Multipriority Traffic: Sophisticated Traffic Management Tools for Ethernet SLAsGain an overview of the must-have H.QoS feature set that NIDs need to support multi-flow, multi-priority traffic.
Topics
- Carrier Ethernet Traffic Management: Purpose and Must-Haves
- Why H.QoS Matters
- H.QoS Features
- H.QoS and RAD Carrier Ethernet Solutions
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTE
LinkedIn Discussions
Case Studies
- RAD’s Service Assured Access Delivers Always-On Service with Optimal QoE for Veteran Rural Telco
- Service Assured Access for Wholesale Services
- Ensuring Premium Carrier Ethernet SLAs
- RAD Provides Performance Monitoring Solution for Sunrise Telecom’s Mobile Network
- Migrating First Responders’ Communications to a Packet Network
Application Briefs
White Papers
Time Distribution Strategies in Cellular Networks – White Paper
Time Distribution Strategies in Cellular Networks
This paper reviews the various methodologies currently available for ensuring Time Of Day (TOD) synchronization in cellular networks. It also introduces RAD’s revolutionary Distributed GMTM scheme, designed to deliver superb TOD accuracy at a lower cost in LTE and small cell networks, by bringing Grandmaster functionality closer to the base station in a small form factor device.
What you will learn:
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTEApplication Guide: Managing the Carrier Ethernet Service Lifecycle – White Paper
Application Guide: Managing the Carrier Ethernet Service Lifecycle
Carrier Ethernet Solutions: Setup, Monitoring, Fault Management, RepairsEnsure profitable Ethernet service delivery by streamlining the deployment, monitoring, and maintenance of your carrier ethernet network.
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTEEthernet OAM Standards – White Paper
Ethernet OAM Standards
A reference guide to Ethernet Link, Connectivity and Service OAMA RAD-sponsored guide to Ethernet OAM standards, including IEEE 802.3-2005 (previously 802.3ah, Clause 57), IEEE 802.1ag and ITU-T Y.1731OAM is a set of functions designed to monitor network operation in order to detect network faults and measure its performance. As Ethernet evolves from enterprise-level LANs to carrier-class networks and services, it requires automated end-to-end management and monitoring by service providers.
Success!
Recommended
Get important update regarding resource file and it's Solution each-system. Add to briefcaseOur representatives contact you better understand your needs. GET A QUOTE
Videos
- RADinsight TI - Threat Intelligence at the Edge
- 2021 Networking Survey Report - EAD
- 2021 Networking Survey Report - 5G
- RAD’s All-In-One 5G xHaul Cell Site Gateway
- RAD's Next Gen EAD
- RAD’s Service Assured Access Solution
- Leading Israeli Telecom Group Cellcom Chooses RAD to Ensure Premium QoE for Mobile, Fixed-Line and OTT TV Services
Blog Posts
- Business Service Assurance: It’s Time for a Fresh Approach - Part 2
- Creativity In Its Time
- Network Service Assurance For Business: It’s Time for a Fresh Approach - Part 1
- Ethernet over Internet: Reaching Your Customers Wherever They Are
- SD-WAN – Unpacking the vCPE Platform
- How NG-EADs Help Network Transformation